BTHFST LED Nightstand with Charging Station, 1 PC, Black and Gold

The measurements

These are the maker's published figures for this piece, converted to centimetres alongside. Measure your own space before ordering: 15.7 by 17.7 inches is the floor it needs, and 28.7 inches is how far up it goes.

Published dimensions describe the assembled piece. Packaging is larger, and a doorway or stairwell has to take the box as well as the finished item.

What it takes out of the room

It stands on 1.9 square feet of floor, 15.7 by 17.7 inches. At 28.7 inches tall it sits below most window sills, so it can usually go under one.

A piece this size is usually placed against something rather than walked around, so the measurement that decides it is the gap you are putting it into, plus room for the drawers to come out.

Our room fit calculator checks the whole range against a room you type in.

What it is made of

Named in this piece's own specification:

• MDF. Used for panels, drawer fronts and shelves. Smooth and stable, heavier than it looks, and unforgiving if it gets wet.

This is the list the maker publishes for this item. We have no information about where or how it is manufactured, and nothing here claims otherwise.

What it holds

3 drawers. Drawer capacity is not published, so we do not state one.

Our storage arithmetic works out what a given number of drawers actually swallows, using the published sizes across the range.

Tip-over, and the rule that covers this kind of piece

Chests and dressers have carried their own federal rule since the STURDY law. The CPSC codified it at 16 CFR part 1261, and it reaches free-standing clothing storage units at least 27 inches tall, at least 30 pounds in mass, with at least 3.2 cubic feet of enclosed storage. This piece is 28.7 inches tall, so height alone does not put it outside that description. Fabric-drawer dressers are included where they meet the criteria.

What the rule asks of such a unit: it has to pass three stability tests, one with the drawers loaded, one applying 10 pounds of horizontal force at the highest hand-hold, and one with a 60 pound weight hung on the drawer most likely to tip it while the rear legs sit on carpet. An anti-tip device meeting ASTM F3096 has to be in the box, and the warning label is part of the requirement.

The bracket only works fitted. It is the cheapest part of the piece and the only one that matters when a child climbs the drawers.

This page is general information, not a substitute for the assembly instructions and safety labels supplied with a product. Follow the manufacturer's instructions, and where a child is involved follow the age guidance printed on the product itself. Source: U.S. Consumer Product Safety Commission, Clothing Storage Units Business Guidance, read 2026-08-08.

Putting it together

This piece arrives flat and is assembled at home. Printed instructions are supplied with it.

The tools needed are included in the box.

We do not publish a build time. The makers in this range do not state one, and a figure invented here would be worth nothing to you. Our assembly guide covers what the specifications across the range do say.